Pacific Pro Group portfolio
Two-story house with attached garage
Explore this two-story house layer by layer: the finished house, the roof, the upper floor, the main floor with every room, and the slab.
Choose a layer, or select Explore to turn the model and go to a room.
Select Explore to turn and zoom the model. Arrow keys turn. Shift with arrow keys pans. Plus and minus zoom. Zero resets. Escape ends exploring. Use Go to a room for a close view.
How to explore
Mouse or touch. Select Explore, then drag to turn. Use the zoom buttons, scroll or pinch to zoom. Right-drag or use two fingers to pan. Choose a room from the menu, or select a room in the drawing, to move closer. Choose Done exploring to scroll the page again.
Keyboard. Focus the drawing and press Enter. Arrow keys turn; Shift with arrow keys pans. Plus and minus zoom, 0 resets, and Escape ends exploring. Use the layer buttons or slider to reveal the house.
Top view looks straight down at the plan. Zooming in lifts the roof and reveals room names. Reset view returns to the selected layer.
- Dining Room
- Kitchen
- Living Room
- Garage
- Bedroom 02
- Bedroom 01
- Master Bedroom
The finished house: two stories over an attached two-car garage, with a covered front porch and a side patio. Choose Explore to turn the model or go to a room.
How the model was made
Modeled from the approved permit set: both floor plans, the roof plan, four elevations, the building section and the window and door schedules. Walls, openings, room names, areas, ceiling heights, roof pitches and the overall height come from those sheets. Anything the sheets do not print is listed below as an assumption.
Roof. From the roof plan and elevations: a 5:12 main gable, a 10:12 cross gable with gable ends on both sides, a 9 5/8:12 gable over the garage, an 11:12 dormer gable and a 5:12 porch roof on three posts. Overhangs are 18 inches and the roofing is asphalt shingle. The highest point is 32'-2" above average grade, as printed.
Garage. The garage is 460 SF with a 12 foot ceiling. Its slab sits three risers below the main floor, with a 16 by 7 foot overhead door and a side door.
Openings. Window and door sizes come from the schedules and sit in the wall gaps drawn on the plans. Heads are set at 6'-8" to line up with the doors, as the elevations show; sills follow from each scheduled window height.
Room layout. Room names, areas and ceiling heights are the ones printed on the plans: 10 feet on the main floor, 9 feet upstairs and 12 feet in the garage. The dining room is open to the upper floor. Select a room to fly in.
Slab. A slab on grade under the main floor, and the garage slab three risers lower.
- 3,063 SF conditioned
- 3 bedrooms and 2 offices
- 42' x 46'-6" footprint
Modeled from the approved permit set: both floor plans, the roof plan, four elevations, the building section and the window and door schedules. Walls, openings, room names, areas, ceiling heights, roof pitches and the overall height come from those sheets. Anything the sheets do not print is listed below as an assumption.
Assumptions (not printed on the plans)
- Window heads at 6'-8" are scaled from the elevations, where they line up with the door heads. Sills are the head minus the scheduled window height.
- Upper floor framing is drawn 1'-6" deep, scaled from the elevation level lines.
- The main floor sits 1'-11" above the garage slab (three printed risers at 7 3/4 inches). The ground is drawn flat at the garage slab.
- Dormer eave and porch roof heights are scaled from the south and west elevations.
- The stair is drawn as a straight run of 18 risers at the printed 7 3/4 inch rise. The turn at its foot is simplified.
- Furniture and fixtures sit where the plan symbols are, scaled from the drawing. Interior doors are shown as open frames.
- The plan examiner's markups on the approved set are applied: the laundry wall moved 1'-6" west, the Office 01 door moved to the hall side, an upstairs door replaced by a 40 inch archway into the primary bedroom, a floor to ceiling window on the main floor north wall, and the larger side patio.
- The markups print only 1'-6", 18' and 40 inches. The moved office door, the archway, the new window and the patio's diagonal edge are scaled from the hand sketch and may be off by several inches.
- The floor to ceiling window runs from the floor to 9'-6". Its head height is not printed.
- Room areas are the printed ones, except the upstairs laundry. Its area was printed as 75.84 SF before the markup moved its wall, so the label shows the redlined area as modeled, about 96 SF. The open living room and the two halls have no drawn boundaries, so their outlines are approximate.
- Siding, stone veneer, deck and porch railings and trim colors are not modeled.
Board feature
Another Story
Same home. Another story. Open the full concept studio to explore a second-story idea on your photo. Concept preview only, not a bid or permit document.